RE: re: Can IA_PD and IA_NA be transfered in one DHCPv6session?
The Cisco Network Registrar (6.2) DHCP server does allow you to do this.
You can request both stateful addresses and delegated prefixes in a
> -----Original Message-----
> From: [hidden email] [mailto:[hidden email]]
> On Behalf Of CTO YAN Renxiang
> Sent: Monday, January 09, 2006 1:12 AM
> To: [hidden email] > Cc: [hidden email] > Subject: [dhcwg] re: Can IA_PD and IA_NA be transfered in one
> In your previous mail you wrote:
> > Can IA_PD and IA_NA options be transfered in one DHCPv6 session?
> > => I can't see any reasons this may not be supported.
> > It seems some Prefix delegation do not support such feature.
> > => you mean some implementations? IMHO there are some limited
> > (i.e., very lazy :-) implementations which don't support
> multiple IAs
> > but this is far from to be the rule.
> DHCP-0.10 (from sourceforge.net), which is based on KAME's
> DHCP implementation,
> support only IA_PD or IA_NA.
> I try to allocate an IPv6 address for CPE, and an IPv6 prefix
> for the home network during
> CPE's interaction with DHCP server, but I failed when use
> DHCP-0.10 as an
> experimental test.
> I will check to see if other implementations have similar problem.
> dhcwg mailing list
> [hidden email] > https://www1.ietf.org/mailman/listinfo/dhcwg >
Re: re: Can IA_PD and IA_NA be transfered in one DHCPv6session?
On Saturday 14 January 2006 07:23, Bernie Volz (volz) wrote:
> The Cisco Network Registrar (6.2) DHCP server does allow you to do this.
> You can request both stateful addresses and delegated prefixes in a
> single request.